TMAM 2017:The 2017 International Conference on
Theoretical Mechanics and Applied Mechanics

Athens, Greece, April 9-11 2017

About the Conference

* Invited and Regular Papers will be published in various Indexed Journals (ISI, SCOPUS, EBSCO, DBLP, ACM, IET/INSPEC, Proquest, Copernicus etc...) based on quality and reviewers' recommendations or in our Books in Springer Verlag. Click here

* Authors will be informed about the title of the Journal before their registration.

* Contact us by email:   Registration fees       Publication Ethics and Malpractice Statement     Deadlines
 (Previous Conference: TMAM 2016, Vienna, Austria, January 15-17, 2016)


Prof. Yuli D. Chashechkin, A.Yu. Ishlinskiy Institute for Problems in Mechanics RAS, RUSSIA, e-mail:
Title: "Consistent Analytical, Numerical and Laboratory Modelling of Flows Around Obstacles"
Abstract: Investigation of flow formation after starting of a body motion performed basing on the system of fundamental equations. Stratified (strong and weak) and homogeneous (potential and actual) fluids at rest were used as basic medium in experiments performed on stands of unique facility and supercomputer's calculations. The coupled system of differential equations for momentum, energy and concentrations of impurities was supplemented by closing equations for density and Gibbs potential together with physically based boundary conditions. Basic spatial and temporal scales of the system were defined and used for construction of similarity criteria, used for comparison of theoretical and experimental data. Evolution of flows around a horizontal strip, wedge or cylinder and sphere were studied. A fine structure of upstream disturbances, internal waves, running and attached vortices, downstream wakes was investigated in a wide range of the flow parameters including diffusion induced flows on motionless obstacles and transient vortex regimes at large values of Reynolds numbers. Observed and computed flow patterns are in good agreement with each other as a whole and in individual details. The transfer the results on flows in the environment and around moving bodies in water and air are discussed.

Prof. Ottavia Corbi, Department of Structural Engineering , University of Naples Federico II, Italy, e-mail:
Title: "Cross/Auto Correlation Response Functions for Designing BI Systems Under Weakly Stochastic Processes"
Abstract: The plenary lecture focuses on main issues concerning the design of base isolation systems for structural dynamic control. The speech mainly outlines an original theoretical approach developed for improving the effectiveness and reliability of ordinary base isolation devices attached to civil engineering structures which undergo exceptional dynamic conditions. The basic idea consists of designing the passive device according to some optimality criterion also accounting for the not-negligible soil-structure interaction effects; at this stage, the isolation device is, then, designed in such a way to be optimally tuned on the characteristics of the structure and of the soil at the site. Thereafter, upon evaluation of the limits intrinsic in the effectiveness of such a passive device (even if already improved by embedding in its design the influence of the soil filtering on the structural response), an active dissipative device is coupled to the basic isolation system, which is , in turn, optimally designed for minimizing the structural response and the control costs. The overall presented approach definitively produces an effective hybrid control base isolation, already optimized for the specific structure and soil in its passive component, and able to concentrate the active control effort only on the frequency ranges where it is required.

Join Mailing List: If you wish to be notified about our INASE conferences, research projects, publications and other important activities you can subscribe to INASE Newsletter. Enter your email address here:  

Paper Submission

Papers must be written in the correct format:  MS Word.doc  or LaTeX  or LaTeX2   and must be uploaded using the following form as .doc, or .pdf file. Invited and Regular Papers will be published in various Indexed Journals based on quality and reviewers' recommendations. Only full papers will be promoted to reviewers for thorough peer review. The deadline for paper submission expired. We do not accept papers any longer.


Organizing Committee

General Chairs (Editors of Proceedings)

  1. Prof. Bogdan Epureanu,
    University of Michigan
    Ann Arbor, MI 48109, USA
  2. Prof. Cho W. Solomon To,
    ASME Fellow, University of Nebraska,
    Lincoln, Nebraska, USA
  3. Prof. Hyung Hee Cho, ASME Fellow
    Yonsei University
    and The National Acamedy of Engineering of Korea,

Senior Program Chair

  1. Prof. Philippe Dondon
    Rue A Schweitzer 33400 Talence

Program Chairs

  1. Prof. Zhongmin Jin,
    Xian Jiaotong University, China
    and University of Leeds, UK
  2. Prof. Constantin Udriste,
    University Politehnica of Bucharest,
  3. Prof. Sandra Sendra
    Instituto de Inv. para la Gestión Integrada de Zonas Costeras (IGIC)
    Universidad Politécnica de Valencia

Tutorials Chair

  1. Prof. Pradip Majumdar
    Department of Mechanical Engineering
    Northern Illinois University
    Dekalb, Illinois, USA

Special Session Chair

  1. Prof. Pavel Varacha
    Tomas Bata University in Zlin
    Faculty of Applied Informatics
    Department of Informatics and Artificial Intelligence
    Zlin, Czech Republic

Workshops Chair

  1. Prof. Ryszard S. Choras
    Institute of Telecommunications
    University of Technology & Life Sciences
    Bydgoszcz, Poland

Local Organizing Chair

  1. Prof. Klimis Ntalianis,
    Tech. Educ. Inst. of Athens (TEI), Athens, Greece

Publication Chair

  1. Prof. Gongnan Xie
    School of Mechanical Engineering
    Northwestern Polytechnical University, China

Publicity Committee

  1. Prof. Reinhard Neck
    Department of Economics
    Klagenfurt University
    Klagenfurt, Austria
  2. Prof. Myriam Lazard
    Institut Superieur d' Ingenierie de la Conception
    Saint Die, France

International Liaisons

  1. Prof. Ka-Lok Ng
    Department of Bioinformatics
    Asia University
    Taichung, Taiwan
  2. Prof. Olga Martin
    Applied Sciences Faculty
    Politehnica University of Bucharest
  3. Prof. Vincenzo Niola
    Departement of Mechanical Engineering for Energetics
    University of Naples "Federico II"
    Naples, Italy
  4. Prof. Eduardo Mario Dias
    Electrical Energy and Automation
    Engineering Department
    Escola Politecnica da Universidade de Sao Paulo

Steering Committee

  • Prof. Aida Bulucea, University of Craiova, Romania
  • Prof. Zoran Bojkovic, Univ. of Belgrade, Serbia
  • Prof. Metin Demiralp, Istanbul Technical University, Turkey
  • Prof. Imre Rudas, Obuda University, Budapest, Hungary

Program Committee

  • Prof. Cho W. Solomon To, ASME Fellow, University of Nebraska, Lincoln, Nebraska, USA
  • Prof. Kumar Tamma, University of Minnesota, Minneapolis, MN, USA
  • Prof. Ottavia Corbi, University of Naples Federico II, Naples, Italy
  • Prof. Pierre-Yves Manach, Universite de Bretagne-Sud, Bretagne, France
  • Prof. Jiin-Yuh Jang, University Distinguished Prof., ASME Fellow, National Cheng-Kung University, Taiwan
  • Prof. Hyung Hee Cho, ASME Fellow, Yonsei University (and National Acamedy of Engineering of Korea), Korea
  • Prof. Robert Reuben, Heriot-Watt University, Edinburgh, Scotland, UK
  • Prof. Ali K. El Wahed, University of Dundee, Dundee, UK
  • Prof. Yury A. Rossikhin, Voronezh State University of Architecture and Civil Engineering, Voronezh, Russia
  • Prof. Igor Sevostianov, New Mexico State university, Las Cruces, NM, USA
  • Prof. Ramanarayanan Balachandran, University College London, Torrington Place, London, UK
  • Prof. Sorinel Adrian Oprisan, Department of Physics and Astronomy, College of Charleston, USA
  • Prof. Yoshihiro Tomita, Kobe University, Kobe, Hyogo, Japan
  • Prof. Ottavia Corbi, University of Naples Federico II, Italy
  • Prof. Xianwen Kong, Heriot-Watt University, Edinburgh, Scotland, UK
  • Prof. Christopher G. Provatidis, National Technical University of Athens, Zografou, Athens, Greece
  • Prof. Ahmet Selim Dalkilic, Yildiz Technical University, Besiktas, Istanbul, Turkey
  • Prof. Essam Eldin Khalil, ASME Fellow, Cairo University, Cairo, Egypt
  • Prof. Jose Alberto Duarte Moller, Centro de Investigacion en Materiales Avanzados SC, Mexico
  • Prof. Seung-Bok Choi, College of Engineering, Inha University, Incheon, Korea
  • Prof. Marina Shitikova, Voronezh State University of Architecture and Civil Engineering, Voronezh, Russia
  • Prof. J. Quartieri, University of Salerno, Italy
  • Prof. Marcin Kaminski, Department of Structural Mechanics, Al. Politechniki 6, 90-924 Lodz, Poland
  • Prof. ZhuangJian Liu, Department of Engineering Mechanics, Institute of High Performance Computing, Singapore
  • Prof. Abdullatif Ben-Nakhi, College of Technological Studies, Paaet, Kuwait
  • Prof. Junwu Wang, Institute of Process Engineering, Chinese Academy of Sciences, China
  • Prof. Jia-Jang Wu, National Kaohsiung Marine University, Kaohsiung City, Taiwan (ROC)
  • Prof. Moran Wang, Tsinghua University, Beijing, China
  • Prof. Gongnan Xie, Northwestern Polytechnical University, China
  • Prof. Ali Fatemi, The University of Toledo, Ohio, USA
  • Prof. Mehdi Ahmadian, Virginia Tech, USA
  • Prof. Gilbert-Rainer Gillich, "Eftimie Murgu" University of Resita, Romania
  • Prof. Mohammad Reza Eslami, Tehran Polytechnic (Amirkabir University of Technology), Tehran, Iran
  • Dr. Anand Thite, Faculty of Technology, Design and Environment Wheatley Campus, Oxford Brookes University, Oxford, UK
  • Dr. Alireza Farjoud, Virginia Tech, Blacksburg, VA 24061, USA
  • Dr. Claudio Guarnaccia, University of Salerno, Italy

Topics of Interest

Plasticity, Fracture and Damage Mechanics, Fatigue Analysis and Design of Welded Structures, Mechanics of Nanomaterials, Fluid-Structure Interaction, Damage Identification and Non Destructive Evaluation (NDE), Computational and Experimental Mechanics, Geomechanics and Mechanics of Granular Materials, Flows in Porous Media, Impact and Multibody, Dynamics, Nonlinear Dynamics, Structural Dynamics and Control, Dynamic Instability and Buckling, Vibrations, Acoustics and Noise Control, Manufacturing Processes, Advanced Materials and Smart Structures, Micro ElectroMechanical Systems (MEMS), Mechatronics, Transport Phenomena in Micro/Nanoscale, Aerodynamics and Aeroelasticity, Computational Fluid Dynamics (CFD), Turbulence and Multiphase Flows, Biomechanics and Biomaterials, Surface Engineering and Contact Mechanics, Heat and Mass Transfer, Compressible Flows, Applications Others...

Location and Venue

Conference Publications

* Invited and Regular Papers will be published in various Indexed Journals based on quality and reviewers' recommendations.

* Authors will be informed about the title of the Journal before their registration.